Bring a fresh draft pour to your outdoor bar with the Perlick 24-inch Signature Series Marine & Coastal beverage dispenser. Its 5.2-cubic-foot cabinet accommodates two sixth-barrel kegs or one quarter-barrel keg, with a choice of single- or double-faucet configurations.
- Cabinet dimensions in the manufacturer drawing: 23⅞ inches wide × 24 inches deep (depth tolerance ± ¹⁄₁₆ inch) × 34⁵⁄₁₆ inches high, excluding the dispensing tower.
- The summary specification table lists 23⅞ × 24 × 34¼ inches. Use the detailed drawing for final cabinet planning.
- Standard handle projection: 1⅜ inches. Custom panels and pulls can change the finished depth.
- The drawing allows up to ¾ inch of additional height from extended leveling feet. Measure the installed unit before final cabinetry work.
- Tower height above the cabinet top in the drawing: 15½ inches including the depicted tap handle. Countertop mounting changes the finished installed height.
- The current installation manual specifies an opening 24 inches wide × 24 inches deep × 34⅜ to 35½ inches high. The older model specification sheet separately lists 24 × 24⅞ × 34½ inches. To achieve a 24-inch installation depth, position the electrical connection beside the installation cavity.
- Allow 25 inches of clear space in front for full door swing or drawer access. The door must open at least 90°; the installation manual calls for at least a 3-inch filler in corner installations.
Follow the complete manufacturer installation instructions, including a properly grounded 15-amp outlet, leveling, countertop support, unobstructed front ventilation and the supplied anti-tip brackets for stationary installations. Optional casters follow separate instructions.
Finish code 1 identifies a solid stainless steel door; code 2 identifies a solid panel-ready door. Choose the required left or right hinge. LL identifies left hinge with a lock; RL identifies right hinge with a lock. The final -1 or -2 identifies one or two faucets. Panel-ready selections require custom panels and handles supplied by you or your cabinetmaker; decorative wood panels pictured are not included. Use the linked panel template, valid for orders entered on or after January 1, 2016.
This listing includes a factory-installed lock. Photos show representative configurations; your selected door finish, hinge, faucet count and lock option determine the supplied model. Other appliances, beverages and food shown in lifestyle photos are not included.
The linked tapping instructions cover the tower, beverage and gas lines, regulator, low-profile keg coupler(s), and the manifold used for two-faucet systems. The guide identifies the standard Perlick 304 stainless steel Lo-Boy coupler (40030SSLD). Choose a keg compatible with the supplied coupler; other keg systems may require a separately purchased compatible coupler. Perlick states that CO₂ tanks ship empty and must be filled before use; beer and a CO₂ fill are not included.
Install the cabinet before the dispensing equipment. For countertop mounting, align the cabinet access hole with the countertop openings and use the full-size mounting template in the tapping instructions. Confirm the print scale before cutting and follow the full manufacturer procedure.
Follow Perlick’s outdoor seasonal-maintenance instructions before cold-weather shutdown. Turn the unit off, disconnect power as directed, remove contents, and clean the cabinet and condenser. The care guide instructs owners not to place a cover over the unit. Resume use only under the conditions specified in the manufacturer instructions.
For eligible new HP and HC undercounter refrigeration produced January 4, 2021 or later, Perlick publishes a limited six-year parts-and-labor warranty, capped at 75 months after shipment from Perlick. Beverage-dispensing components have a separate one-year parts-and-labor warranty, capped at 15 months after shipment. Coverage is for the original purchaser, requires proper registration and is subject to installation, care, cosmetic-coverage limits and other exclusions in the linked warranty statement. Floor models follow separate terms.
