Perlick 24 Inch Indoor Beer Dispenser with Solid Door and Lock

• Forced-air refrigeration for consistent cooling around kegged beverages.
• Stainless steel interior and exterior.
• White LED task lighting.
• Digital temperature control, audible door-ajar alarm and automatic off-cycle defrost.
• R600a refrigerant and 1,000-BTU-per-hour cooling capacity.
• One- or two-faucet draft-arm configurations; select the tap count before ordering.
• D-system low-profile keg coupler(s) and faucet handle(s) are supplied for the selected configuration.
• Factory-installed door lock included.

• Exact model family: HP24TS-4; indoor use.
• Net cabinet volume: 5.2 cubic feet.
• Keg accommodation: two 1/6-barrel kegs or one 1/4-barrel keg (standard or slim).
• Adjustable temperature setpoint: 33°F to 42°F.
• Electrical supply: 115 VAC, 60 Hz, single phase; manufacturer-listed running load 1.9 amps.
• 6-foot grounded cord with a NEMA 5-15P plug; no plumbing connection required.
• Shipping weight: 222 pounds.

• Cabinet dimensions in the manufacturer drawing: 23⅞ inches wide × 24 inches deep (± ¹⁄₁₆ inch) × 34⁵⁄₁₆ inches high, before handle projection and leveling adjustment; height excludes the draft tower.
• Standard door-handle projection: 1⅜ inches. Custom panels or pulls can change the finished depth.
• The drawing allows up to ¾ inch of additional height from the leveling feet.
• Current installation-manual rough opening: 24 inches wide × 24 inches deep × 34⅜ to 35½ inches high.
• Use at least a 3-inch filler in corner installations and allow 25 inches in front for door swing and shelf access.
• The draft-arm drawing shows 15½ inches from the mounting surface to the top of the faucet handle. Countertop thickness and mounting position affect the final installed height.

Keep the front grille unobstructed, with at least 2 inches of air space in front of the condenser. Use a properly grounded 15-amp outlet and install the anti-tip brackets as directed. Confirm the actual appliance, outlet location, leveling and door treatment before completing cabinetry. Install the dispensing equipment after positioning the cabinet, and align the countertop holes with the cabinet access hole using the manufacturer template. CO₂ cylinders ship empty and require filling before use. Have trained personnel handle the high-pressure gas setup and follow the tapping manual for cleaning and connections.

Choose a solid stainless steel or solid panel-ready door, left- or right-hand hinge, and single or double tap. Panel-ready models are intended for a custom front and pull; follow the manufacturer template. Choose the factory hinge direction when ordering. Door reversal requires the appropriate Perlick hinge kit and is not recommended for an existing custom wood overlay.

The representative image shows a single-tap stainless steel model. Double-tap and panel-ready configurations differ. Lock detail is not shown in the representative image.

Perlick publishes a six-year limited residential warranty for eligible new units. Dispensing components have separate one-year parts-and-labor coverage, limited to one year after installation or 15 months after shipment, whichever comes first. Production-date eligibility, registration requirements, coverage periods and exclusions are governed by the manufacturer warranty statement.

• Perlick HP24TS product information
• Exact model specifications, configuration codes and drawing
• Current installation and operating instructions
• Use and care guide
• Solid custom-panel template
• Tapping installation, cleaning and mounting-hole template
• Door reversal instructions and required hinge kits
• Residential warranty terms