Keep draft beer close to the conversation with the Summerset RFR-24DK outdoor kegerator. Its 6.6-cubic-foot refrigerated cabinet combines a clean stainless-steel finish with digital temperature control, interior lighting and front ventilation for an outdoor kitchen. Choose the cabinet alone or pair it with the matching single- or double-tap kit.
| Selection |
Included components |
| No Tap |
RFR-24DK kegerator cabinet; tap kit is not included. |
| Single Tap |
RFR-24DK cabinet plus RFR-TAP-1 single-tap kit, including tap tray, single hose and CO2 tank with regulator. |
| Double Tap |
RFR-24DK cabinet plus RFR-TAP-2 double-tap kit, including tap tray, two hoses and CO2 tank with regulator. |
The Single Tap and Double Tap selections on this listing include the refrigerated cabinet, not just a replacement tower. Kegs are sold separately. The photos show the three available configurations; choose the tap option you need.
| Measurement |
Width × Depth × Height |
| Kegerator cutout |
24-5/8 × 24 × 34-5/8 inches |
These are the kegerator opening dimensions in Summerset's August 2026 cutout sheet, not the appliance's overall dimensions or the height of a tap tower. Verify the delivered unit, tap arrangement, door swing and installation details before fabricating the island. An optional RTK-24LG trim kit is sold separately; its trim dimensions are not a substitute for the appliance cutout.
Install in a level, well-ventilated location away from grills, ovens, direct sunlight and other heat sources. The manual specifies an ambient operating range of 50°F to 109.4°F. After transport, leave the cabinet upright for approximately 24 hours before connecting power. Use an individual, properly grounded, ground-fault-protected outlet matching the appliance rating label, with electrical installation checked by a qualified electrician.
For a countertop-mounted tower, keep the tower close to the cabinet and seal and insulate the beer-line passage as directed in the manual. An open gap allows warm air into the cabinet and can cause foamy pours. Installation and tap-kit assembly are required.
The current manufacturer's Gold Standard warranty provides qualifying replacement-part coverage for the original purchaser at the original delivery location, subject to its full terms. Register online within 30 days, retain proof of purchase and maintain the appliance as instructed. Labor and installation costs are not included.
