SKU: BIM68OSPUMP

Summit BIM68OSPUMP 15-Inch Stainless Steel Outdoor Ice Maker with Built-In Pump

$3,537.00

Shipping calculated at checkout

Door Swing: Right Hand Door Swing

Available Now!

Keep clear ice close to your drinks station with the Summit BIM68OSPUMP. Its stainless steel exterior and front ventilation suit a built-in installation or freestanding placement, with an internal drain pump and space to store up to 26 lb of ice.

This listing describes the legacy 62-lb-per-day, R134a configuration documented in Summit's 2024 model literature. It is separate from the later 47-lb-per-day, R600a revision published under the same model name.

  • Produces clear gourmet-style ice and stores up to 26 lb in the insulated ice bin. Actual output varies with air and water temperatures and installation conditions.
  • An internal drain pump moves meltwater to a suitable drain connection for more flexible placement.
  • A stainless steel door and cabinet with a horizontal stainless handle give the unit a finished appearance.
  • 304 stainless steel exterior, front ventilation and frost-free operation.
  • Choose the right- or left-hinged version to suit the installation; the stainless door is reversible as described in the manual.
  • An ice scoop and interior scoop holder keep serving convenient.

Photos show the right-hinged configuration; select the door swing needed for your installation.

  • Right-hinged model: BIM68OSPUMP. Left-hinged model: BIM68OSPUMPLHD.
  • Manufacturer-listed daily production for this legacy configuration: up to 62 lb per 24 hours; ice storage: 26 lb.
  • Cabinet capacity: 0.98 cu. ft.
  • Ice size: approximately 1¼ inches high × 1⅛ inches wide × 1⅛ inches deep.
  • Electrical: 115 V AC, 60 Hz; manufacturer-listed current: 4.0 A.
  • Legacy refrigerant: R134a, 7.4 oz.
  • Net weight: 105 lb.
  • ETL and ETL-C electrical listings; ETL-S sanitation listing to NSF-12.
  • Width: 14⅞ inches. Depth without handle: 22⅝ inches; depth with handle: 24½ inches.
  • Height to hinge cap: 33⅝ inches; cabinet height: 33½ inches.
  • Depth with door open 90°: 37¼ inches.

These are appliance dimensions, not a finished cabinet cutout. Allow space for the water and drain connections, leveling, ventilation, door movement and service access. Use the linked model drawing and installation manual when planning cabinetry.

Professional installation is required. Provide a cold potable-water supply through a ¼-inch line at 20–80 psi, drainage and a grounded 115 V, 60 Hz supply on a 15-amp circuit. All electrical and plumbing connections must comply with applicable local codes. Do not use an extension cord. The pump still requires a drain connection; follow the manual's pump-routing and air-gap instructions.

Keep the front grille unobstructed. Outdoor installation must be protected from wind, rain and water spray, within the manual's 50–100°F operating range and away from grills or other heat sources. Follow the cleaning and winterization instructions; frost-free operation does not eliminate routine cleaning.

Summit's model literature lists a one-year limited parts-and-labor warranty and five-year compressor coverage. Compressor replacement labor is excluded. Geographic restrictions, installation requirements and other terms apply; see the full warranty in the manual.