Infratech SL-1612 Slimline 29-1/2-Inch 1,600W Single-Element Electric Patio Heater, 120V

• Model: SL-1612
• 1,600 watts; 120 volts; 13.3 amps
• 29-1/2-inch single-element heater
• Heater body dimensions: 29-1/2 inches long × 4-3/4 inches wide × 3 inches deep, excluding mounting brackets and junction-box projection; use the manufacturer drawing for installation planning
• Stainless-hue anodized aluminum housing with stainless trim
• Designed for wall or ceiling surface mounting; the T-slot supports flexible bracket placement
• Use a properly rated on/off switch or voltage-matched INF Input Regulator; controls are sold separately and must match the heater load

• Permanent models must be hardwired by a licensed electrician; confirm the site voltage before ordering because voltage is model-specific
• For surface mounting, maintain at least 6 inches behind the heater, 18 inches from its sides and ends, and 36 inches in front. Wall mounting also requires at least 12 inches below the ceiling; ceiling mounting requires at least 6 inches below the ceiling. Minimum floor clearance is 6 feet for a UL-labeled heater or 8 feet for a UL/CUL-labeled heater. Follow every installation-specific mounting angle and clearance in the complete manual
• Install the quartz tube horizontally level and choose mounting height, quantity and aiming from the project conditions; wind and exposure can reduce effective coverage
• Standard wall/ceiling swivel brackets are included. Controls, specialized mounting accessories and branch-circuit materials are sold separately

View the official SL-Series product guidance · Review installation and electrical requirements · SL-Series installation, use and care manual · Heater dimensions and electrical specifications