Infratech W-3024 61-1/4-Inch 3,000W Single-Element Electric Patio Heater, 240V

• Model: W-3024
• 3,000 watts; 240 volts; 12.5 amps
• 61-1/4-inch single-element heater
• Heater body dimensions: 61-1/4 inches long × 8-3/16 inches wide × 3 inches deep, excluding mounting brackets and junction-box projection; use the manufacturer drawing for installation planning
• Corrosion-resistant 304 stainless steel construction
• For wall, ceiling or compatible pole mounting; a correctly sized optional W/WD-Series frame supports flush mounting in a flat, non-sloped ceiling
• Use a properly rated on/off, input-regulator or compatible Infratech custom control; controls are sold separately and must match the heater load

• Permanent models must be hardwired by a licensed electrician; confirm the site voltage before ordering because voltage is model-specific
• For surface mounting, maintain at least 6 inches behind the heater, 18 inches from its sides and ends, and 36 inches in front. Wall mounting also requires at least 12 inches below the ceiling; ceiling mounting requires at least 6 inches below the ceiling. Minimum floor clearance is 6 feet for a UL-labeled heater or 8 feet for a UL/CUL-labeled heater. Follow every installation-specific mounting angle and clearance in the complete manual; flush-mount installations must also follow the matching frame instructions
• Install the quartz tube horizontally level and choose mounting height, quantity and aiming from the project conditions; wind and exposure can reduce effective coverage
• Standard wall/ceiling swivel brackets are included. Controls, specialized mounting accessories and branch-circuit materials are sold separately

View the official W/WD-Series product guidance · Review installation and electrical requirements · W/WD-Series installation, use and care manual · Heater dimensions and electrical specifications