Infratech Marine UpGrade WD-6024 61-1/4-Inch 6,000W Dual-Element Electric Patio Heater

• Quartz elements deliver medium-wave infrared warmth to people and nearby surfaces.
• Marine UpGrade 316 stainless steel construction; regular cleaning is still required, especially after saltwater exposure.
• Wall/ceiling swivel mounting brackets are supplied with the heater.
• Wall, ceiling or compatible pole mounting; an optional matching W/WD flush-mount frame allows recessing into a flat, non-sloped ceiling. Infratech’s C/CD drop-pole assembly is not specified for this family.
• Controls and optional mounting accessories are sold separately. Select controls for the actual heater voltage and load.

• Output: 6,000 watts; two heating elements.
• Body: 61-1/4 inches long × 8-3/16 inches wide × 3 inches deep, per the manufacturer CAD drawing; 9-3/8 inches from the mounting surface to the heater face in the illustrated bracket position.
• Voltage selections in this listing: 240 V, 208 V, 277 V and 480 V. These are distinct voltage-specific heaters, not a multi-voltage appliance.
• At 240 V: 25 amps. Use the selected heater’s rating label for the actual electrical requirements.
• Manufacturer planning range for the 240-volt model: 8–12 feet mounting height and approximately 11 × 11 feet average coverage. Wind, cold and exposure can reduce coverage; final installation must meet the heater label and all clearance requirements.

• The 277-volt and 480-volt versions are for commercial use only; Infratech prohibits heaters above 240 volts for residential or household use.
• Permanent hardwiring and servicing require a licensed electrician. Confirm site voltage and control choice before wiring.
• Keep at least 6 inches behind the heater, 18 inches from sides and ends, and 36 inches in front. Wall mounting also requires 12 inches from the ceiling. Follow the complete manual for mounting angles, label-specific minimum height and any greater local requirement.
• Install the quartz tube horizontally level; do not leave an operating heater unattended.
• Disconnect power and let the heater cool before cleaning. Remove salt deposits with fresh water and a soft cloth, then dry thoroughly.

Gallery graphics illustrate the heater family and may show standard 304 stainless construction or other family options. This listing is the Marine UpGrade 316 stainless configuration.

Marine UpGrade overview · Reference manual · Installation, use and care manual · Heater dimensional drawing