Create a portable outdoor warming station with the Heatstrip X-DGR32PLP head-and-stand kit.
Key Features
- Four-tile ceramic burner.
- Electronic finger-pull ignition, tilt-safety switch and flame-failure device.
- Protective grille and reflector.
Specifications
- Manufacturer: Heatstrip
- Exact listing SKU: X-DGR32PLP-KIT
- Listing configuration: X-DGR32PLP-HEAD plus X-DGR32PLP-STAND
- Fuel: propane only
- Nominal gas consumption: 32,225 BTU/hr
- Test-point pressure: 2.74 kPa
- Compatible LPG cylinder: 20 lb; cylinder not included.
Dimensions
- Combined heater-and-stand net weight: 31.5 kg
- Overall assembled width/depth/height are not fully specified in the linked manufacturer reference; the 2610-mm diagram dimension is required overhead space, not heater height.
Compatibility & Installation
- Use the matching X-DGR32PLP head and stand together in the manufacturer-approved configuration.
- For the assembled system, minimum combustible clearances are 500 mm above, 1000 mm at sides and front, and 300 mm at rear. The specified optional heat shield may reduce overhead clearance to 300 mm.
- Operate on a firm, level, noncombustible surface. Do not move the heater when operating or hot.
- Outdoor use only in an above-ground, naturally ventilated location that meets the manual’s enclosure requirements. Do not use in a garage or other enclosed area.
- Have a qualified gas installer verify the fuel, pressure, connections and leak checks. Do not convert this heater to a different fuel.
Manufacturer Resources
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor