Give your side-by-side True refrigeration columns a coordinated finish with the 66-inch joining kit, part 811073. Designed for the TR-30 + TR-36 arrangement, this kit brings the cabinet combination together with a stainless steel grille, matching-width toe kick and anti-condensation pads.
Product image: The retained grille photo is illustrative, not a photograph of the complete kit. Other kit components are not shown. The pictured grille’s width and configuration have not been verified for this exact part; select the kit using the stated cabinet combination.
True’s column installation guide lists one joining rainshield assembly, one joining kickplate, anti-sweat foam end panels, joining bracket hardware, 1/4-20 × 1-inch hex-head screws and 1/4-inch split lock washers. The quantities of pads, brackets and fasteners vary by kit size.
This is the TR-30-left/TR-36-right arrangement when viewed from the front; the reversed TR-36-left/TR-30-right arrangement uses a different kit. The nominal width identifies the cabinet combination, not a cabinet cutout or clearance. Follow the installation instructions for the appliances being joined. True does not offer joining kits for hinge-to-hinge layouts. Each appliance must be leveled and secured with its own anti-tip bracket; disconnect electrical power before installation.
Standalone accessory height, depth and individual component measurements are not specified in the manufacturer sources reviewed. The nominal kit width, where shown, identifies the cabinet combination—not a cutout dimension. Use the appliance installation guide for openings and clearances.
Product image: The retained grille photo is illustrative, not a photograph of the complete kit. Other kit components are not shown. The pictured grille’s width and configuration have not been verified for this exact part; select the kit using the stated cabinet combination.
