Perlick 24 Inch C-Series Indoor Beverage Center With Lock

• Wine and refrigerator shelves extend on vibration-dampened stainless steel ball-bearing glides.
• Stainless steel wine shelves resist odor absorption.
• Stainless steel interior with a black vinyl exterior for built-in indoor applications.
• Selectable white or blue LED lighting and an audible door-ajar alarm.
• Digital temperature control, automatic off-cycle defrost and R600a refrigerant.
• Factory configuration: door lock included; choose the door finish and left- or right-hand hinge to suit your space.

• Model family: HC24BB-4; indoor use.
• Net capacity: 5.2 cubic feet; manufacturer-rated storage for up to 62 cans and 16 wine bottles.
• Adjustable temperature setpoint: 33°F to 48°F.
• Cooling capacity: 800 BTU per hour.
• Electrical supply: 115 VAC, 60 Hz, single phase; manufacturer-listed running load 2.2 amps.
• Power connection: 6-foot cord with a grounded NEMA 5-15P plug. No plumbing connection required.
• Shipping weight: 195 pounds.

• Overall cabinet: 23⅞ inches wide × 34¼ inches high. Nominal depth is 24 inches; the dimensioned drawing specifies 24¹⁄₁₆ inches ± ¹⁄₁₆ inch before the handle.
• Standard handle projection: 1⅜ inches. A custom overlay panel or pull can change the finished depth.
• Finished rough opening in the current installation manual: 24 inches wide × 24 inches deep × 34⅜ to 35½ inches high. Plan the electrical connection and finished door projection using the linked drawings.
• Corner installation requires at least a 3-inch filler; allow 25 inches in front for door swing and full shelf extension.

Keep the front ventilation grille unobstructed, with at least 2 inches of air space in front of the condenser. Use a properly grounded 15-amp outlet and install the anti-tip brackets as directed in the manufacturer manual. Confirm the actual appliance, outlet location and chosen door treatment before finalizing cabinetry.

Choose solid stainless steel, solid panel ready, stainless steel glass, or panel ready glass. Panel-ready models are designed for a custom front and pull; use the appropriate manufacturer template when planning your cabinetry. Select the factory hinge direction when ordering. Reversing the door requires the appropriate Perlick hinge kit; reversal is not recommended for an existing custom wood overlay.

The representative image shows the stainless steel glass-door version. Other door finishes and hinge orientations differ; lock detail is not shown. Food and beverages in the image are display items.

Perlick publishes a six-year limited residential warranty for eligible new units. Production-date eligibility, registration requirements, coverage periods and exclusions are governed by the manufacturer warranty statement linked below.

• Perlick HC24BB product information
• Model specifications, configuration codes and dimensional drawing
• Current installation and operating instructions
• Use and care guide
• Solid custom-panel template for HP and HC doors
• Glass custom-panel template for HP and HC doors
• Door reversal instructions and required hinge kits
• Residential warranty terms