Keep ingredients and refreshments close at hand with the Perlick 24-inch Signature Series Marine & Coastal refrigerated drawers. Two pull-out compartments and 5.2 cubic feet of cold storage bring convenient organization to your outdoor kitchen.
- Cabinet dimensions in the manufacturer drawing: 23⅞ inches wide × 24 inches deep (depth tolerance ± ¹⁄₁₆ inch) × 34⁵⁄₁₆ inches high.
- The summary specification table lists 23⅞ × 24 × 34¼ inches. Use the detailed drawing for final cabinet planning.
- Standard handle projection: 1⅜ inches. Custom panels and pulls can change the finished depth.
- The drawing allows up to ¾ inch of additional height from extended leveling feet. Measure the installed unit before final cabinetry work.
- The current installation manual specifies an opening 24 inches wide × 24 inches deep × 34⅜ to 35½ inches high. The older model specification sheet separately lists 24 × 24 × 34½ inches. To achieve a 24-inch installation depth, position the electrical connection beside the installation cavity.
- Allow 25 inches of clear space in front for full door swing or drawer access.
Follow the complete manufacturer installation instructions, including a properly grounded 15-amp outlet, leveling, countertop support, unobstructed front ventilation and the supplied anti-tip brackets for stationary installations. Optional casters follow separate instructions.
Finish code 5 identifies stainless steel drawer fronts; code 6 identifies panel-ready drawer fronts. The DL suffix identifies locking drawers. Panel-ready selections require custom panels and handles supplied by you or your cabinetmaker; decorative wood panels pictured are not included. Use the linked panel template, valid for orders entered on or after January 1, 2016.
Choose with or without a factory-installed lock. Photos show representative configurations; your selected drawer finish and lock option determine the supplied model. Other appliances, beverages and food shown in lifestyle photos are not included.
Winterize refrigerator models before daily low temperatures reach 38°F, following Perlick’s care guide. Turn the unit off, disconnect power as directed, empty and clean the cabinet and condenser, and do not place a cover over the unit. Restart after daily lows are above 38°F and allow the cabinet to stabilize before adding perishables.
For eligible new HP and HC undercounter refrigeration produced January 4, 2021 or later, Perlick publishes a limited six-year parts-and-labor warranty, capped at 75 months after shipment from Perlick. Coverage is for the original purchaser, requires proper registration and is subject to installation, care, cosmetic-coverage limits and other exclusions in the linked warranty statement. Floor models follow separate terms.
