SKU: HP24RM-4-1L

Perlick 24-Inch Signature Series Marine & Coastal Refrigerator

$6,570.00

Shipping calculated at checkout

Door: Solid Stainless Steel
Hinge: Left Hinge

Available Now!

Keep drinks and ingredients within easy reach with the Perlick 24-inch Signature Series Marine & Coastal refrigerator. A 5.2-cubic-foot cabinet and full-extension shelving make it easy to organize refreshments alongside your outdoor cooking space.

  • Full-extension shelving on vibration-dampened stainless steel ball-bearing glides helps you reach items at the back of the cabinet.
  • Stainless steel interior with selectable white or blue LED lighting.
  • Digital temperature control and an audible open-door alarm.
  • Marine & Coastal Perlick Armor upgrades the stainless steel, fasteners and refrigeration system for corrosion resistance. Includes Perlick Anti-Condensation System.
  • Front ventilation supports undercounter installation when the required airflow and clearances are maintained.
  • R600a refrigerant and automatic off-cycle defrost.
  • Manufacturer model family: HP24RM-4.
  • Net refrigerated volume: 5.2 cubic feet.
  • Manufacturer-listed storage: up to 144 cans. Actual capacity depends on container sizes and arrangement.
  • Current manufacturer operating range: 33°F–42°F, supported by the exact-model page and the current HP24R controller table.
  • Electrical supply: 115 VAC, 60 Hz, single phase.
  • The model specification sheet lists a 1.9-amp running load. Use the appliance rating label and installation instructions for electrical requirements.
  • 6-foot grounded cord with a NEMA 5-15P plug; no plumbing connection required.
  • Manufacturer-rated cooling capacity: 1,000 BTU per hour.
  • Manufacturer-listed shipping weight: 213 pounds.
  • Cabinet dimensions in the manufacturer drawing: 23⅞ inches wide × 24 inches deep (depth tolerance ± ¹⁄₁₆ inch) × 34⁵⁄₁₆ inches high.
  • The summary specification table lists 23⅞ × 24 × 34¼ inches. Use the detailed drawing for final cabinet planning.
  • Standard handle projection: 1⅜ inches. Custom panels and pulls can change the finished depth.
  • The drawing allows up to ¾ inch of additional height from extended leveling feet. Measure the installed unit before final cabinetry work.
  • The current installation manual specifies an opening 24 inches wide × 24 inches deep × 34⅜ to 35½ inches high. The older model specification sheet separately lists 24 × 24 × 34½ inches. To achieve a 24-inch installation depth, position the electrical connection beside the installation cavity.
  • Allow 25 inches of clear space in front for full door swing or drawer access. The door must open at least 90°; the installation manual calls for at least a 3-inch filler in corner installations.

Follow the complete manufacturer installation instructions, including a properly grounded 15-amp outlet, leveling, countertop support, unobstructed front ventilation and the supplied anti-tip brackets for stationary installations. Optional casters follow separate instructions.

Finish code 1 identifies a solid stainless steel door; code 2 identifies a solid panel-ready door. Code 3 identifies a stainless steel-framed glass door; code 4 identifies a panel-ready glass door. Choose the required left or right hinge. LL identifies left hinge with a lock; RL identifies right hinge with a lock. Panel-ready selections require custom panels and handles supplied by you or your cabinetmaker; decorative wood panels pictured are not included. Use the linked panel template, valid for orders entered on or after January 1, 2016.

This listing is supplied without a factory-installed lock. Photos show representative configurations; your selected door finish, hinge and lock option determine the supplied model. Other appliances, beverages and food shown in lifestyle photos are not included.

Winterize refrigerator models before daily low temperatures reach 38°F, following Perlick’s care guide. Turn the unit off, disconnect power as directed, empty and clean the cabinet and condenser, and do not place a cover over the unit. Restart after daily lows are above 38°F and allow the cabinet to stabilize before adding perishables.

For eligible new HP and HC undercounter refrigeration produced January 4, 2021 or later, Perlick publishes a limited six-year parts-and-labor warranty, capped at 75 months after shipment from Perlick. Coverage is for the original purchaser, requires proper registration and is subject to installation, care, cosmetic-coverage limits and other exclusions in the linked warranty statement. Floor models follow separate terms.