Give your outdoor refrigerator opening a clean, finished edge with Sunstone’s Signature Series beveled trim. The raised stainless steel frame covers the edge of the island opening while its deep inner flange provides a mounting surface. This listing uses the original BA-TRIM2 ordering code; Sunstone’s corresponding current specification identifies the trim as BA-TRIM21.
| Store ordering code |
BA-TRIM2 |
| Current manufacturer drawing reference |
BA-TRIM21 |
| Overall trim size |
24 inches wide × 35 inches high × 3 inches deep |
| Wall cutout shown in the product specification |
22¾ inches wide × 34½ inches high |
| Frame material |
16-gauge 304 stainless steel |
The listed cutout comes from the model-specific dimensioned specification linked below. It is not the refrigerator’s cabinet size or a universal ventilation clearance. Match the supplied trim and exact refrigerator to that drawing before cutting or modifying the island.
Keep the required space around the refrigerator and follow its installation instructions. Rear-vented refrigerators still require suitable ventilation behind the appliance or at the side of the island; the trim does not replace those ventilation provisions. Confirm appliance depth, service access and any other required clearances independently of the trim opening. The 21-inch fit designation is not a guarantee of compatibility with every appliance of that nominal width.
Maintain the stainless steel finish according to Sunstone’s care guidance. The linked trim specification lists three-year coverage for the structure and exterior finish; coverage is subject to the manufacturer’s applicable warranty terms.
