Bring a gas flame to a compatible Belgard Weston paver fire feature with this Warming Trends insert kit. The package pairs a CFB240 CROSSFIRE brass burner with a 39-inch circular aluminum plate, plus the matching mounting and gas-control components. Choose natural gas or liquid propane to suit the planned installation.
- For outdoor use only. Installation and service must be performed by a qualified installer, service agency or gas supplier.
- Select the natural-gas or liquid-propane kit to match the gas supply. The installer must size the fuel line and regulation for the burner demand and verify the appliance label and applicable instructions.
- For match-lit operation, the June 2026 manual lists natural-gas inlet pressure of 3.5–7 inches water column and propane inlet pressure of 11–13 inches water column.
- Use a level, stable, non-combustible enclosure. Provide drainage, service access and at least two opposing ventilation openings of 18 square inches each; more ventilation may be needed for the enclosure and local requirements.
- Follow the manual’s clearance diagram: minimum 36-inch horizontal combustible clearance from the top of the flame and minimum 84-inch vertical combustible clearance above the burner/plate. Confirm all required clearances with the installer.
- Use only manufacturer-approved fire-rated media. These components are for a decorative gas fire feature, not for grilling or warming food. Pavers, gas supply, media and optional ignition upgrades are not included.
For the 39-inch plate, the manual recommends non-combustible center support because the plate exceeds 30 inches. The plate diameter is not a finished fire-pit outside diameter; verify the complete Weston layout before installation.
The gallery currently shows an image-coming-soon placeholder; the kit itself is not pictured.
