Bring the welcoming look of a gas fire to your outdoor space with the Warming Trends CFBL150 Linear CROSSFIRE® brass burner. Its linear layout creates a defined line of flame for a custom fire feature. Choose the burner alone or one of the available packages to suit your installation. Natural gas and propane versions are offered separately.
| Selection |
Included components |
| Burner Only |
CFBL150 brass burner with WATERSTOP |
| with Flex Line Kit (FK1) |
Burner and FK1 kit; no plate |
| with Plate |
Burner and 38 × 8-inch rectangular aluminum plate (ALPL388); no flex-line kit |
| with Plate and Flex Line Kit (FK1) |
Burner, 38 × 8-inch rectangular aluminum plate and FK1 kit |
Each configuration is offered for natural gas or liquid propane. Select both the correct fuel and the package you need; the product photograph shows the burner common to these selections.
- One 36-inch-long, ¾-inch-diameter flex line and two ¾-inch flared fittings.
- One ¾-inch key valve with an escutcheon and 3-inch and 12-inch keys.
- One ½-inch × 2-inch nipple.
The key valve provides manual gas control. No electronic or push-button ignition system is included.
A plate or flex-line kit is included only when expressly named in the selected package. Enclosure, decorative media, fuel supply and any site-specific regulator or additional plumbing are separate. This is not a complete ready-to-connect fire pit.
- Burner length: 29¾ inches long, per the manufacturer's June 2024 CFBL150 technical drawing.
- Plate in the with-plate selections: 38 inches long × 8 inches wide.
The technical drawing carries a ¾-inch tolerance. These are component measurements, not a finished enclosure cutout or installed height. Confirm the actual components, support, ventilation and service access before fabrication.
For outdoor use only. A qualified gas professional must verify the fuel supply and install the burner in accordance with the manufacturer's instructions and local codes. These are gas-specific CFBL150 versions, not the newer universal burners. Use a supported, noncombustible enclosure with proper drainage, ventilation and an accessible external gas shutoff. Observe the manual's clearances, approved-media limits and maintenance requirements. Never leave an operating fire feature unattended.
Warming Trends' full lifetime warranty applies to the CROSSFIRE brass burner, subject to the manufacturer's terms and exclusions. It does not extend that burner coverage to the plate, optional accessories or third-party installation services.
