SKU: WTCFBO280NGALPL30CFK2

Warming Trends CFBO280 CROSSFIRE® Burner with 30-Inch Square Plate and FK2 Kit

$2,026.00

Shipping calculated at checkout

Gas Type: Natural Gas

Available Now!
Description Features Specifications and included components FK2 kit contents Dimensions Installation and use Warranty Manufacturer resources

Create an inviting outdoor gathering space with the Warming Trends CFBO280 CROSSFIRE® burner with a 30-inch square aluminum plate and FK2 dual flex-line kit. The octagonal brass burner is designed for a lively, full flame, while the matching flat plate provides a base for an approved outdoor fire-feature installation. Select natural gas or liquid propane to match your fuel supply.

  • Octagonal CROSSFIRE brass burner with a maximum rated output of 280,000 BTU per hour.
  • All-brass burner construction resists corrosion.
  • WATERSTOP® fitting helps keep water and debris out of the gas supply and valve components while allowing water in the burner manifold to purge.
  • Includes a 30-inch square aluminum plate, not a raised-edge pan.
  • Includes the FK2 connection kit with two flex lines and a manual key valve. Select the natural gas or propane burner configuration to match your supply.
Burner model CFBO280
Natural gas configuration CFBO280NGALPL30SFK2
Liquid propane configuration CFBO280LPALPL30SFK2
Included plate ALPL30S; 30 inches × 30 inches
Maximum burner output 280,000 BTU per hour
Included components Fuel-specific brass burner with WATERSTOP fitting, square aluminum plate and FK2 dual flex-line kit
  • Two 36-inch-long, ¾-inch-diameter flex lines and four ¾-inch flared fittings.
  • One ¾-inch key valve with an escutcheon and 3-inch and 12-inch keys.
  • Two ¾-inch × 3-inch nipples and two ¾-inch tees.
  • One ¾-inch × ½-inch male-to-male reducer fitting.

The key valve provides manual gas control; an electronic or push-button ignition system is not included. Enclosure, decorative media, fuel supply and any site-specific regulator or additional plumbing are separate. The qualified installer must configure the connections for the selected fuel and this burner; this is not a complete ready-to-connect fire pit.

  • Burner footprint: 22⅜ inches long × 21½ inches wide, as specified on Warming Trends' June 2024 CFBO280 technical drawing.
  • Included flat plate: 30 inches × 30 inches.

The manufacturer's burner drawing specifies a ¾-inch tolerance. The footprint is not an enclosure cutout specification. Confirm the actual burner, plate support, ventilation and service access with the installer before fabricating an enclosure. The linked burner drawing illustrates a circular plate; this listing includes the square plate identified above.

For outdoor decorative fire features only, not cooking. Installation must follow the manufacturer's instructions and local codes and be completed by a qualified gas professional. Select the correct fuel version; do not apply newer universal-burner fuel-adapter instructions to these gas-specific CFBO models. Use a properly supported, noncombustible enclosure with drainage, ventilation and an accessible external gas shutoff. Follow the manual's required clearances and approved-media instructions, and never leave an operating fire feature unattended.

Warming Trends provides its full lifetime warranty for the CROSSFIRE brass burner, subject to the manufacturer's terms and exclusions. That burner warranty does not extend to the plate, separate accessories or third-party installation services. See the warranty section of the manual for complete details.