Create a welcoming gathering place around your outdoor fire feature with the Warming Trends CFBO360 Octagonal CROSSFIRE brass burner. This package includes the gas-specific burner, the 42 in × 42 in square aluminum plate and the FK2 flex-line/key-valve kit. Select natural gas or liquid propane to match your supply.
Key Features
- Octagonal brass burner for an outdoor decorative gas fire feature.
- Octagonal jet arrangement suited to a circular or square fire feature.
- WATERSTOP fitting helps keep water and debris out of the gas line and downstream components.
- Included plate: aluminum support plate with drainage vents; a flat plate, not a raised-sidewall pan.
- Includes two 36-in × 3/4-in flex lines and a 3/4-in key valve.
Specifications
- Manufacturer burner model: CFBO360; maximum rated output: 360,000 BTU.
- Fuel: gas-specific natural gas (NG) or liquid propane (LP), according to the selected option.
- Ignition: match-lit configuration; automatic ignition is not included.
- Store item codes: Natural Gas — WTCFBO360NGALPL42SFK2; Liquid Propane — WTCFBO360LPALPL42SFK2.
- Package: CFBO360 burner, ALPL42S aluminum plate, FK2 flex-line/key-valve kit.
- FK2 contents: two 36-in × 3/4-in flex lines, four 3/4-in flared fittings, 3/4-in key valve, 3-in and 12-in keys, two 3/4-in × 3-in nipples, two 3/4-in tees and one 3/4-in × 1/2-in male/male reducer.
Dimensions
- Manufacturer nominal plan-view burner dimensions: 29 in × 27 in.
- Manufacturer minimum fire-feature opening: 42 in (circular or square).
- Plate size for plate-included selections: 42 in × 42 in square.
- Total burner height is not dimensioned in the cited model drawing; confirm the installed envelope and gas-connection space with your installer.
Compatibility & Installation
- Outdoor decorative fire-feature use only; this is not a cooking or grill burner. Keep food and solid fuels away.
- Have a qualified gas/plumbing professional verify fuel, supply capacity, connections, clearances and local-code requirements before installation.
- For match-lit operation, supply pressure must be 3.5–7.0 in W.C. for natural gas or 11.0–13.0 in W.C. for liquid propane.
- Use a stable, level, noncombustible enclosure with drainage, an accessible external gas shutoff and an unfilled lower cavity. The support structure, not the gas valve or line, must carry the assembly.
- Maintain at least 36 in horizontal clearance to combustibles, measured from the top of the flame as shown in the manual, and 84 in vertically above the burner/plate. Recess the assembly 4–6 in below the enclosure top; review the complete clearance diagram before building.
- Provide at least two opposing enclosure vents, each with at least 18 sq in of ventilation area. Larger enclosures or extended use may require more ventilation.
- Use only approved outdoor fire-feature media with pieces at least 1/2 in in size; cover jets by no more than 1/2 in of media. Place media onto the plate or pan instead of dumping it over the burner, and follow the complete manual. Remove any cover before lighting and let the feature cool completely before covering.
- Enclosure, media, cover, gas supply/regulation and automatic ignition are not included unless separately specified.
- Warming Trends recommends an ignition system for burners over 300,000 BTU; choose a manufacturer-approved system with your installer. It is not included in this package.
- Plan a noncombustible center support: the manufacturer recommends additional support for round/square plates over 30 in and rectangular plates over 40 in.
Manufacturer Resources
Manufacturer contact: Warming Trends, 303-346-2224 or orders@warming-trends.com. Have the exact model, fuel and selected package available when confirming fit or service.
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor